Filter
Top Products
Commands 183
6-00020-02
SNC 5100
trapDestShow
The
trapDestShow command allows you to view the SNMP trap destination
table maintained within the SNC 5100. The broadcast address for the Ethernet
port is also automatically included in the table. When the ADIC Management
Console is running, it inserts its address into the table automatically.
For more information, see the ADIC Management Console User Guide.
SN60023 > trapDestShow
Trap Destination IP Address
---------------------------
192.168.30.255
206.0.64.17
206.0.64.25
206.0.64.35
206.0.64.255
value=1=0x1
SN60023 >
tzSet “timezone”
The tzSet command sets the timezone offset from Greenwich Mean Time.
SN60023 > tzSet “PDT”
TZ Set TIMEZONE
value=0=0x0
SN60023 >
udpstatShow
The
udpstatShow command displays UDP statistics for the Ethernet network.
Interpreting these statistics requires detailed knowledge of Internet networking
protocols. This information may be useful to the LAN administrator.
SN60023 > udpstatShow
UDP:
8514 total packets
8445 input packets
69 output packets
0 incomplete header
0 bad data length field
0 bad checksum
8383 broadcasts received with no ports
0 full socket