Filter
Top Products
SNC 5100
114 Commands
6-00020-02
Usually a value of 0 indicates success, but some successful commands return a
different value.
arptabShow
The
arptabShow command displays the contents of the ARP table. The ARP
table contains the current Internet-to-Ethernet address mappings. This
information may be useful to the LAN administrator.
SN60023 > arptabShow
192.168.1.19 at 8:0:20:23:2f:db
value=0=0x0
SN60023 >
cd
You can move to a different directory (usually in the flash file system) using
the cd command.
SN60023 > cd "MGMT"
value=0=0x0
SN60023 >
clearReservation[devId]
The
clearReservation command can be used to force-clear a reservation
held by a host for the specified target device. It may be necessary to issue this
command if a host that has a reservation for a shared device was disconnected
from the SNC 5100 without properly shutting down the application software
that issued the reservation. If this is the case, other hosts that attempt to access
the shared device will repeatedly receive reservation conflict status from the
device. Issuing this command may result in resetting the target device.
SN60023 > clearReservation 4
value=0=0x0
SN60023 >
Parameter Value
devId The index of the device (LUN)