Filter
Top Products
Event Codes and Actions 41
6-00020-02
SNC 5100
Action Reference Table
Numerical references from the Action column in Table 7: Event Codes and
Actions are associated with the appropriate MAP in Table 8: Action Reference
Table.
203
6,8
N.A. N.A. Heartbeat communication restored 0
Notes:
1
See Table 9 on page 42.
2
See Table 8 on page 41.
3
Default Trap Threshold settings are explained “Events” in the ADIC Management Console User
Guide.
4
Check the Event Log to find out which interface (FCAL or SCSI) caused this event. Then use the
appropriate action number.
5
This trap signals a change in state. A string sent with the trap will indicate the nature of the previous
state.
6
Events not logged in SNC 5100 Event Log.
7
Not Reported. View the Server Log.
8
Event reported only when ADIC Management Console 2.7 or above is running
Table 8: Action Reference Table
Action
Number Action
0 No action necessary
1Go to “SCSI Channel MAP” on page 50
2Go to “Fibre Channel MAP” on page 61
3Go to “MAP for the SNC 5100” on page 66
4Go to “Temperature MAP” on page 66
5Go to “Power MAP” on page 68
Table 7: Event Codes and Actions
Event
Code
Viewing
Level
1
Default
Trap
Threshold
Description
Action
2