Filter
Top Products
SNC 5100
132 Commands
6-00020-02
terminal.
SN600726 > gateAddrSet “10.0.0.1”
gateAddrSet: Error setting current gate addr:
S_errno_ENETUNREACH
value = -1 = 0xffffffff = payloadChecksum + 0xffd418a3
The new gateway address is written to the bootup parameters to be used at the
next boot. If at next boot, the address is reachable, then it will be written to the
system file. If at next boot the gateway address is not reachable and therefore
not written to the system file, the following message is displayed:
Failed gateAddrSet (2):
SN600726 > gateAddrSet “172.16.76.1”
gateAddrSet: Error deleting old gateway addr: S_errno_ESRCH
Gateway Address set to 172.16.76.1 for Ethernet interface
value=0=0x0
SN600726 >
help
The
help command displays a list of the shell commands.
SN60023 > help
help Print this list
cleHelp Print Command Log Entry info