Filter
Top Products
Agilent 87130A Operating and Service Manual 5-3
Replaceable Parts
Accessory Boards and
Cables
Additional driver boards, interconnect boards, and cables provide expanded
capacity, remote switching and everything needed for device connection.
Firmware Revisions Older versions of this instrument may have firmware part numbers different
from those listed in Table 5-4 on page 5-8 for U7 and U8. However, the
firmware parts listed are the most current versions of the firmware and are
the preferred replacement parts. The current firmware versions are backward
compatible for all instruments.
Table 5-1 Accessories
Part Number Description
11764-60009 Cable (no sensing), 10 pin DIP to 4-pin Berg connectors, 30 inches
(used with 87222C,D,E transfer switch)
11764-60010 Cable (sensing), 10 pin DIP to 4-pin Berg connectors, 30 inches (used
with 87222C,D,E transfer switch)
70611-60004 Cable, 68-pin to 68-pin SCSI II, 6 feet, 28 AWG
70611-60008 32 cables with connectors, 52 inches, 26 AWG
(84940A to switches)
70611-60010 Cable, 36-pin SCSI II to 36 pin SCSI II, shielded, 5 feet, 28 AWG
70611-60011 Cable, ribbon, 36-pin SCSI II to 34-pin, 18 inches, 28 AWG
70611-60013 Cable kit, ribbon 36-pin SCSI to 34-pin
70612-60011 Cable, dual 36-pin SCSI II to 34-pin ribbon, 36 inches, 28 AWG
84940A Driver board
84941A Distribution board