Filter
Top Products
4-38 Agilent 87130A Operating and Service Manual
Remote Operation
:DELete
:DELete
Syntax
ROUTE :DELete
Description
This command deletes:
• All data associated with the specified path or group and frees up the path
storage register.
• All channels from the PFAIL list.
This command sets memory to an initial state.
NOTE The
:DELete and the :DELay shortform is the same. The :DELete command
applies only in syntax with other subsystems and not directly to channel lists
from
ROUTe.
Example Command • ROUTE:PATH:DELETE ATTEN_14;
This deletes the path with pathname ATTEN_14 and all data in it.
• ROUTE:PATH:DELETE:ALL;
This deletes all paths.
• ROUTE:GROUP:DEL ATTEN;
This deletes all data associated with the group ATTEN. The group name is set
to the default (refer to
MEM:DELETE).
• ROUTE:GROUP:DEL:ALL;
This deletes all data associated with all the groups. The group names are set
to the default (refer to
MEM:DELETE).
• ROUTe:PFAil:DELete;
This command removes all data from the PFAIL:OPEN and PFAIL:CLOSE
lists.
:PATH
:GROUP
<path name>
<group name>
[:ALL]