Filter
Top Products
Web -
Click Port, Rate Limit, Input/Output Port/Trunk Configuration. Set the Input
Rate Limit Status or Output Rate Limit Status, then set the rate limit for the individual
interfaces, and click Apply.
Figure 8-11 Rate Limit Configuration
CLI -
This example sets the rate limit for input and output traffic passing through
port 1 to 600 Mbps.
8
Configuring Rate Limits
Console(config)#interface ethernet 1/1
Console(config-if)#rate-limit input 600
Console(config-if)#rate-limit output 600
Console(config-if)#
27-1
30-1
8-21