Filter
Top Products
router rip
This command enables Routing Information Protocol (RIP) routing for all IP
interfaces on the router. Use the
no
form to disable it.
Syntax
[no] router rip
Command Mode
Global Configuration
Default Setting
Disabled
Command Usage
• RIP is used to specify how routers exchange routing table information.
• This command is also used to enter router configuration mode.
Example
Console(config)#router rip
Console(config-router)#
Related Commands
network (42-9)
42-6
Command
version
redistribute
ip rip receive version
ip rip send version
ip split-horizon
ip rip authentication key
ip rip authentication
mode
show rip globals
show ip rip
Function
Specifies the RIP version to use on all network interfaces (if not
already specified with a receive version or send version
command)
Redistribute routes from one routing domain to
another
Sets the RIP receive version to use on a network interface
Sets the RIP send version to use on a network interface
Enables split-horizon or poison-reverse loop prevention
Enables authentication for RIP2 packets and specifies keys
Specifies the type of authentication used for RIP2 packets
Displays global configuration settings and statistics for RIP
Displays RIP configuration information for each network interface
Mode Page
RC 42-11
RC 42-11
IC 42-12
IC 42-13
IC 42-14
IC 42-14
IC 42-15
PE 42-16
PE 42-16
IP Routing Commands
Table 42-5 Routing Information Protocol Commands
(Continued)
42