Filter
Top Products
Statically maps a physical address to an IP address
Shows dynamically learned entries in the IP routing table
Shows internal addresses used by the switch
Shows statistics on ARP requests sent and received
Shows statistics for IP traffic, including the amount of traffic,
address errors, routing, fragmentation and reassembly
Shows statistics for ICMP traffic, including the amount of traffic,
protocol errors, and the number of echoes, timestamps, and
address masks
Shows statistics for UDP, including the amount of traffic and
errors
Shows statistics for TCP, including the amount of traffic and TCP
connection activity
Configures and display static routing entries
Shows all routing entries, including local, static and dynamic
routes
Table 3-2 Switch Main Menu
(Continued)
Menu Description Page
ARP Address Resolution Protocol
General Sets the protocol timeout, and enables or disables proxy ARP for
the specified VLAN
19-8
19-9
19-11
19-12
19-13
19-14
19-16
19-16
19-17
19-19
19-20
19-21
19-21
19-22
20-1
20-2
20-3
Static Addresses
Dynamic Addresses
Other Addresses
Statistics
Statistics
IP
ICMP
UDP
TCP
Routing
Static Routes
Routing Table
Routing Protocol
RIP Routing Information Protocol
General Settings
Network Addresses
Interface Settings
Redistribute Configuration
Statistics
3-10
Enables or disables RIP, sets the global RIP version and timer
values
Configures the network interfaces that will use RIP 20-5
Configures RIP parameters for each interface, including send
and receive versions, message loopback prevention, and
authentication
Imports external routing information from other routing domains
into the autonomous system
Displays general information on update time, route changes and
number of queries, as well as a list of statistics for known
interfaces and neighbors
20-6
20-9
20-11
Configuring the Switch
3