Filter
Top Products
Related Commands
show ipv6 access-list (26-11)
show ipv6 access-group
This command shows the ports assigned to IPv6 ACLs.
Command Mode
Privileged Exec
Example
Console#show ip access-group
Interface ethernet 1/2
IPv6 standard access-list david in
Console#
Related Commands
ipv6 access-group (26-11)
MAC ACLs
The commands in this section configure ACLs based on hardware addresses,
packet format, and Ethernet type. To configure MAC ACLs, first create an access list
containing the required permit or deny rules, and then bind the access list to one or
more ports
Table 26-4 MAC ACL Commands
Command Function
access-list mac Creates a MAC ACL and enters configuration mode
permit, deny Filters packets matching a specified source and
destination address, packet format, and Ethernet type
show mac access-list Displays the rules for configured MAC ACLs
mac access-group Adds a port to a MAC ACL
show mac access-group Shows port assignments for MAC ACLs
Mode Page
GC 26-12
MAC-ACL 26-13
PE 26-15
IC 26-15
PE 26-16
access-list mac
This command adds a MAC access list and enters MAC ACL configuration mode.
Use the
no
form to remove the specified ACL.
Syntax
[no] access-list mac acl_name
acl_name – Name of the ACL. (Maximum length: 16 characters)
Default Setting
None
26-12
Access Control List Commands
26