Filter
Top Products
Displays settings and operational state for the remote side
Sets the broadcast storm threshold for each port
Sets the broadcast storm threshold for each trunk
Sets the source and target ports for mirroring
Sets the input rate limit for each port
Sets the input rate limit for each trunk
Sets the output rate limit for each port
Sets the output rate limit for each trunk
Lists Ethernet and RMON port statistics
Displays entries for interface, address or VLAN
Displays or edits static entries in the Address Table
Sets timeout for dynamically learned entries
Spanning Tree Algorithm
Table 3-2 Switch Main Menu
(Continued)
Description
Configures IP addresses that are allowed management
access
Displays port connection status
Displays trunk connection status
Configures port connection settings
Configures trunk connection settings
Specifies ports to grou
p into static trunks
Page
6-26
8-1
8-1
8-1
8-3
8-3
8-7
8-8
8-8
IP Filter
Port
Port Information
Trunk Information
Port Configuration
Trunk Configuration
Trunk Membership
LACP
Configuration
Aggregation Port
Port Counters Information
Port Internal Information
Port Neighbors Information
Port Broadcast Control
Trunk Broadcast Control
Mirror Port Configuration
Rate Limit
Input Port Configuration
Input Trunk Configuration
Output Port Configuration
Output Trunk Configuration
Port Statistics
Address Table
Static Addresses
Dynamic Addresses
Address Aging
Spanning Tree
STA
Allows ports to dynamically join trunks
Configures parameters for link aggregation group members 8-10
Displays statistics for LACP protocol messages 8-13
Dis
plays settings and operational state for the local side 8-14
8-16
8-17
8-17
8-19
8-20
8-20
8-20
8-20
8-20
8-22
9-1
9-1
9-2
9-4
10-1
10-3
10-6
10-10
10-10
Information Displays STA values used for the bridge
Configuration Configures global bridge settings for STP, RSTP and MSTP
Port Information Displays individual port settings for STA
Trunk Information Displays individual trunk settings for STA
3-6
Configuring the Switch
3
Menu