Filter
Top Products
Communication key with TACACS server: *****
Server port number: 49
Console#
Web Server Commands
This section describes commands used to configure web browser management
access to the switch.
Table 25-7 Web Server Commands
Command Function Mode Page
ip http port Specifies the port to be used by the web browser interface GC 25-11
ip http server Allows the switch to be monitored or configured from a browser GC 25-12
ip http secure-server Enables HTTPS (HTTP/SSL) for encrypted communications GC 25-12
ip http secure-port Specifies the UDP port number for HTTPS GC 25-13
ip http port
This command specifies the TCP port number used by the web browser interface.
Use the no form to use the default port.
Syntax
ip http port port-number
no ip http port
port-number - The TCP port to be used by the browser interface.
(Range: 1-65535)
Default Setting
80
Command Mode
Global Configuration
25-11
Command Mode
Privileged Exec
Example
Console#show tacacs-server
Remote TACACS server configuration:
Server IP address:
1
0.11.12.13
Web Server Commands
show tacacs-server
This command displays the current settings for the TACACS+ server.
Default Setting
None
25