Filter
Top Products
Description
Indicates if RIP has been enabled or disabled.
The interval at which RIP advertises known route information.
(Default: 30 seconds)
Number of times routing information has changed.
Number of router database queries received by this router.
IP address of the interface.
RIP version sent on this interface (none, RIPv1, RIPv2, rip1Compatible).
RIP version received on this interface (none, RIPv1, RIPv2, RIPv1Orv2).
Shows if split-horizon, poison-reverse, or no instability prevention method
is in use.
Shows if authentication is set to simple password or none.
Number of bad RIP packets received.
Number of bad routes received.
Number of route changes.
IP address of a neighboring RIP router.
Last time a route update was received from this peer.
Whether RIPv1 or RIPv2 packets were received from this peer.
Number of bad RIP packets received from this peer.
Number of bad routes received from this peer.
20-11
Displaying RIP Information and Statistics
You can display basic information about the current global configuration settings for
RIP, statistics about route changes and queries, information about the interfaces on
this router that are using RIP, and information about known RIP peer devices.
Table 20-1 RIP Information and Statistics
Parameter
Globals
RIP Routing Process
Update Time in Seconds
Number of Route Changes
Number of Queries
Interface Information
Interface
SendMode
ReceiveMode
InstabilityPreventing
AuthType
RcvBadPackets
RcvBadRoutes
SendUpdates
Peer Information
PeerAddress
UpdateTime
Version
RcvBadPackets
RcvBadRoutes
Configuring the Routing Information Protocol
20