Filter
Top Products
Changing the Aging Time
You can set the aging time for entries in the dynamic address table.
Command Attributes
• Aging Status – Enables/disables the aging function.
• Aging Time – The time after which a learned entry is discarded.
(Range: 10-1000000 seconds; Default: 300 seconds)
Web
– Click Address Table, Address Aging. Specify the new aging time, click Apply.
Figure 9-3 Address Aging
CLI
– This example sets the aging time to 400 seconds.
Console(config)#mac-address-table aging-time 400
Console(config)#
9-4
3
1
-
4
Address Table Settings
9