Filter
Top Products
Displaying Current VLANs
The VLAN Current Table shows the current port members of each VLAN and
whether or not the port supports VLAN tagging. Ports assigned to a large VLAN
group that crosses several switches should use VLAN tagging. However, if you just
want to create a small port-based VLAN for one or two switches, you can disable
tagging.
Command Attributes
(Web)
• VLAN ID – ID of configured VLAN (1-4093).
• Up Time at Creation – Time this VLAN was created (i.e., System Up Time).
• Status – Shows how this VLAN was added to the switch.
-
Dynamic GVRP
: Automatically learned via GVRP.
-
Permanent
: Added as a static entry.
• Egress Ports – Shows all the VLAN port members.
• Untagged Ports – Shows the untagged VLAN port members.
Web
– Click VLAN, 802.1Q VLAN, Current Table. Select any ID from the scroll-down
list.
Figure 11-3 VLAN Current Table
11-5
IEEE 802.1Q VLANs
CLI
– Enter the following command.
Console#show bridge-ext
Max support VLAN numbers: 4096
Max support VLAN ID: 4093
Extended multicast filtering services: No
Static entry individual port: Yes
VLAN learning: IVL
Configurable PVID tagging: Yes
Local VLAN capable: No
Traffic classes: Enabled
Global GVRP status: Disabled
GMRP: Disabled
Console#
11
3
4
-
2