Barco R59770057 Projector User Manual


 
11. Lamp menu
Image 11-7
About over-temperature protection
When the projector software detects a too high lamp temperature it automatically reduce the lamp power with 20%. This reduction
will be visible on the Lamp power menu.
It is possible to adjust the lamp power again to a higher value but the software will reduce the lamp power again if the temperature
is still to high.
At the same time, an message will be displayed on the LCD panel.
11.4 Lamp Identication
About
The lamp identication menu gives an overview of the most important parameters of the used lamps. It starts with the rst lamp.
Scrolling to other lamps is possible with the cursor keys.
These parameters are:
Serial number lamp
Article number of the used lamp
Run time since rst start up of the lamp
Remaining run time for a safe operation of the lamp
Number of strikes since the rst start up of the lamp
Status of the lamp
These parameters are useful when calling for a service intervention.
How to display?
1. Press MENU to activate the menus.
2. Use the or key to select Lamp and press ENTER.
3. Use the or key to select Identication and press ENTER.
The identication overview is displayed.
4. Use the or key to select another lamp.
The status is given lamp per lamp.
Image 11-8
Image 11-9
Image 11-10
R59770057 CLM HD8 15/03/2010 113