Filter
Top Products
16. Servicing
B
C
A
Image 16-3
Mounting the lens
4. Insert the lens in such a way that the female jack (C) is in front of the male jack (upper left corner) (B) and ensure the lens touches
the front plate of the lens holder.
Caution: Do not release the lens yet, as the lens may fall out of the lens holder.
5. Secure the lens in the lens holder by sliding the lens lock handle A into the “locked” position (left position for table mounted
projector).
6. Check if the lens is really secured by trying to pull the lens out of the lens holder.
CAUTION: Never transport the projector with a Lens mounted in the Lens Holder. Always remove the Lens
before transporting the projector. Neglecting this can damage the Lens Holder and Prism.
16.4 Lens removal
How to remove the lens
1. Remove the front cover of the projector. See "Removal of the front cover", page 181.
2. Support the lens with one hand and push the lens lock handle to the right.
Image 16-4
Lens removal
3. Pull out the lens backward until the jack connection is open (A). Slide the lens out of the lens holder.
172
R59770057 CLM HD8 15/03/2010