Filter
Top Products
16. Servicing
A
B
C
Image 16-2
Front filter replacement
4. Insert a new HEPA filter by pulling the spring clamp away and insert the filter into its position. Release the spring clamp.
5. Reinstall the front cover of the projector, see "Installation of the front cover", page 187.
CAUTION: Never install a used HEPA filter. Always install a new HEPA filter.
CAUTION: Never use the projector with a removed cover. Always reinstall the removed cover.
16.3 Lens installation
How to install the lens
1. Remove the front cover of the projector. See "Removal of the front cover", page 181.
2. Remove the foam rubber in the opening of the lens holder if not yet removed.
3. Place the lock handle A is in its right position (table mounted projector).
R59770057 CLM HD8 15/03/2010
171