Barco R59770057 Projector User Manual


 
13. Projector control
Level 1 Level 2 Level 3
Menu [Center]
Bar scale [Bottom]
Local LCD contrast
Language
English
Français
Deutsch
Español
Italiano
13.2 Projector address
Overview
Individual projector address
Common address
13.2.1 Individual projector address
About individual projector address
Before a projector, and only this projector, can be controlled via a remote control, an individual address must be entered in the
projector.
This individual projector address can then be used to control the projector via remote control or via a serial connection.
Next to an individual projector address, each projector has also a common address for group control.
How to set an individual address?
1. Press MENU to activate the menus.
2. Use the or key to select Projector control and press ENTER.
3. Use the or key to select Projector address and press ENTER.
4. Use the or key to select Projector Address and press ENTER.
The edit projector address window opens.
5. Use the or key to select a new value
Or,
enter a new value with the digit keys on the remote control or local keypad.
6. Use the or key to select the next digit and repeat step 5.
7. When the desired address is entered, press ENTER to store that address.
Image 13-1
Image 13-2
Image 13-3
136 R59770057 CLM HD8 15/03/2010