Filter
Top Products
14. Service menu
3. Use the ▲ or ▼ key to select Diagnosis and press ENTER.
The diagnosis screen will be displayed.
4. Use the ▲ or ▼ key to select Error logging and press ENTER.
The Error logging overview menu is displayed.
For more explanation about the stored error message, see "Error codes", page 205.
Image 14-32
Image 14-33
Image 14-34
14.4 Internal service patterns
How to select
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Service and press ENTER.
The service window opens.
3. Use the ▲ or ▼ key to select Internal service patterns and press ENTER.
The internal service pattern window opens.
4. Use the ▲ or ▼ key to select the desired patterns and press ENTER.
When a pattern is selected, press ENTER to toggle to other patterns of the selected type. Press EXIT to return to the internal
service pattern menu.
Image 14-35
Image 14-36
Image 14-37
14.5 Restore factory defaults
What can be done?
All settings ofthe projector will beset to the original factory settings withthe exception of theIP address, serial settings, DMX settings
and High altitude mode. For these settings the choice exists to exclude them in the reset operation. .
Howtomakeanexception
1. Press MENU to activate the menus.
160
R59770057 CLM HD8 15/03/2010