Barco R59770057 Projector User Manual


 
12. Alignment menu
3. Use the or key to select Gamma and press ENTER.
The Gamma progress bar appears.
4. Use or key to change the gamma setting and press EXIT.
Gamma can be set to one of the 8 available steps.
Image 12-22
Image 12-23
Image 12-24
12.8 Internal pattern
What can be done with these patterns?
The projector is equipped with different internal patterns which can be used for measurement and alignment purposes.
How to select?
1. Press MENU to activate the menus.
2. Use the or key to select Alignment and press ENTER.
3. Use the or key to select Internal patterns and press ENTER.
The internal patterns menu is displayed.
4. Use the or key to scroll through the possible selection and press ENTER to activate the selected pattern.
Select or in the menu to display the previous or next page with possible internal patterns.
Image 12-25
Image 12-26
Image 12-27
R59770057 CLM HD8 15/03/2010 121