Filter
Top Products
3-65
Confidential
(9) Signal isolation
(10) Video signal reception
Code 1 Code 2 Causes
90 01
Unable to detect video signals and commands within 6
seconds after CFR is transmitted.
90 02
Received PPS containing invalid page count or block
count.
Code 1 Code 2 Causes
A0 03
Error correction sequence not terminated even at the
final transmission speed for fallback.
A0 11 Receive buffer empty. (5-second time-out)
A0 12
Receive buffer full during operation except receiving into
memory.
A0 13 Decoding error continued on 500 lines or more.
A0 14 Decoding error continued for 10 seconds or more.
A0 15 Time-out: 13 seconds or more for one-line transmission.
A0 16 RTC not found or carrier OFF detected for 6 seconds.
A0 17
RTC found but no command detected for 60 seconds or
more.
A0 19 No video data to be sent
A8 01 RTN, PIN, or ERR received at the calling terminal. *
A9 01 RTN, PIN, or ERR received at the called terminal. *
AA 18 Receive buffer full during receiving into memory.
* Available in German models only.