Filter
Top Products
3-10
Confidential
Error
codes
Problem
Refer
to:
Error
codes
Problem
Refer
to:
7F
Fax paper setting mismatch
(The setting paper bexomes
besides the A4/Letter/Legal/
Folio) (Not applicable)
3-23 A8
Scanning color parameter
matching miss
3-30
80
Fax paper size is incorrect (The
paper is smaller 10mm than the
letter size (11inch) in Fax List/
Report)
3-23 AD
DMA transfer error
3-31
83
Discharge detection error (Unable
to print after the discharge
detection error until Drum Unit is
replaced.) (Discharge detection
error occurs when the machine
detects the drum discharge with
Drum life reaches more than twice
the standard Drum Life.)
3-23 AE
CCD unit home position sensor
is not turned on.
3-31
84
Paper jam
3-24 AF
CCD unit home position sensor
is not turned off.
3-31
85
Tray 1 is not installed into the
machine
3-24 B0
Scanning FFC detection error
3-32
86
Tray 2 is not installed into the
machine
3-24 B1
Dark level offset data level error
for scanning
3-32
88
Paper jam inside the machine
3-25 B2
Gain control data level error for
scanning
3-32
89
Incorrect paper size in duplex
printing
3-25 B7
A/D converter standard voltage
failure; at High side
3-32
8A
Paper jam in Tray 1
3-26 B8
A/D converter standard voltage
failure; at Low side
3-32
8B
Paper jam in Tray 2
3-26 B9
Scanning light adjustment error
is detected
3-33
8C Paper jam in MP Tray 3-26 BB White level data error 3-33
8D Paper jam near eject tray 3-27 BD Black level data error 3-33
99
Specified paper size is not
supported for duplex printing
(DX)
3-27 BF
ADF duplex scanning cannot be
implemented due to too long
document
3-33
9D Not used C0 New toner detection lever failure 3-34
9F
Paper empty
3-28 C7
Run out of memory for data
expansion of PC printer
3-34
A1 Front cover opened 3-28 C8 Secure print data full 3-34
A2
During scanning, 90 cm or longer
of a document is detected
3-29 C9
DIMM error
3-35
A3
Document rear sensor is not
turned on when feeding the
document
3-29 CA
Excess current to USB device
3-35
A4
ADF cover opened
(Not applicable)
3-29 CD
Drum unit is not installed into the
machine
3-35
A5 Fax scanning error (Warning) 3-30 D1 Modem initialization failed 3-36
A6
Fax scanning error (Error)
3-30 DD
Fuser error other than 58, 59,
68, 69, 6A, 6B, 6C, 6D, 6E, 6F,
76, 78, DE and E2 are occurred
3-36
A7
Scanning color parameter file
failure 3-30 DE
Central temperature of heat
roller detected the temperature
that was lower than edge (60?C)
3-36