Filter
Top Products
7-22
Confidential
4.12 Switching the USB Setting (Function code 45)
<Function>
If connect with the full-speed USB (ver.2.0) in the case of Vista (operation system), as for this
function, the operation system does not recognize the serial number of USB device
depending on the PC and USB device. When the operation system does not recognize,
increase that the device is connected the PC. To solve the problem, the return value of the
serial number switch the "0".
• USBNo.=ON: ON: Return to the serial number of the machine.
• USBNo.=OFF: Return to the "0".
<Operating Procedure>
(1) Press the [4] and [5] keys in this order in the initial stage of the maintenance mode.
The “USBNo.=ON” will appear on the LCD.
(2) Press the [OK] button. and select the “USBNo. = ON” or “USBNo. = OFF” by pressing
the [ ] or [ ] button. And press the [OK] or [Start] button. The machine beeps for
approx. one second, and return to the initial stage of the maintenance mode.