Filter
Top Products
Setting the system date & time
Cisco TelePresence Content Server 4.1 printable online
Page 110 of 121
Setting the system date & time
It is important that the system date, time and time zone are correct. They are set as part of the
installation procedure (see the Content Server Getting Started Guide), but can be updated if required,
as follows.
1. Open the
Windows Server administration interface: go to Management settings > Windows
server.
2. Go to Maintenance > Date/Time.
3. Update the date, time and time zone settings and then click OK.
4. Restart the Content Server: go to Maintenance > Shutdown > Restart.