Filter
Top Products
Restoring to Content Server defaults
Cisco TelePresence Content Server 4.1 printable online
Page 117 of 121
8. Use the Up or Down arrows to navigate to Commands and press Enter to select.
9. Use the Up or Down arrows to navigate to either FullRestore or ConfigRestore (see the notes
above.) and press Enter.
10. Close the terminal emulator session and disconnect the serial cable.
WARNING: Do not leave a terminal emulator session open after it is no longer in use. An open
session may cause issues for system operation and when restarting the Content Server.
Terminal emulator session keys
Enter key
Enters Edit mode, confirms an entry.
Esc key
Returns to the previous menu, exits Edit mode without saving.
Up and Down
arrow keys
Moves between menu items, moves between values in a numerical address and
modifies numerical values.