Filter
Top Products
Index
IN-40
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
OL-9639-06
SNMP (continued)
engine ID 29-7
groups 29-7, 29-10
host 29-7
ifIndex values 29-5
in-band management 1-4
informs
and trap keyword 29-12
described 29-5
differences from traps 29-5
disabling 29-16
enabling 29-16
limiting access by TFTP servers 29-16
limiting system log messages to NMS 28-10
manager functions 1-3, 29-3
MIBs
location of A-3
supported A-1
notifications 29-5
overview 29-1, 29-4
security levels 29-3
status, displaying 29-22
system contact and location 29-16
trap manager, configuring 29-14
traps
described 29-3, 29-5
differences from informs 29-5
disabling 29-16
enabling 29-12
enabling MAC address notification 5-23
overview 29-1, 29-4
types of 29-12
users 29-7, 29-10
versions supported 29-2
SNMP traps
REP 17-12
SNMPv1 29-2
SNMPv2C 29-2
SNMPv3 29-3
snooping, IGMP 21-1
software images
location in flash B-23
recovery procedures 42-2
scheduling reloads 3-21
tar file format, described B-23
See also downloading and uploading
source addresses, in IPv4 ACLs 31-11
source-and-destination-IP address based forwarding,
EtherChannel
34-8
source-and-destination MAC address forwarding,
EtherChannel
34-7
source-IP address based forwarding, EtherChannel 34-8
source-MAC address forwarding, EtherChannel 34-7
Source-specific multicast
See SSM
SPAN
configuration guidelines 26-10
default configuration 26-9
destination ports 26-6
displaying status 26-22
interaction with other features 26-8
monitored ports 26-5
monitoring ports 26-6
overview 1-10, 26-1
ports, restrictions 22-12
received traffic 26-4
session limits 26-10
sessions
configuring ingress forwarding 26-14, 26-21
creating 26-11
defined 26-3
limiting source traffic to specific VLANs 26-15
removing destination (monitoring) ports 26-12
specifying monitored ports 26-11
with ingress traffic enabled 26-13
source ports 26-5
transmitted traffic 26-5
VLAN-based 26-6