Filter
Top Products
Contents
ix
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
OL-9639-06
Using 802.1x Readiness Check 8-7
Using IEEE 802.1x with Port Security 8-7
Using IEEE 802.1x with VLAN Assignment 8-8
Configuring IEEE 802.1x Authentication 8-9
Default IEEE 802.1x Configuration 8-10
IEEE 802.1x Configuration Guidelines 8-11
Maximum Number of Allowed Devices Per Port 8-11
Configuring 802.1x Readiness Check 8-12
Configuring IEEE 802.1x Violation Modes 8-13
Configuring IEEE 802.1x Authentication 8-13
Configuring the Switch-to-RADIUS-Server Communication 8-15
Configuring Periodic Re-Authentication 8-16
Manually Re-Authenticating a Client Connected to a Port 8-16
Changing the Quiet Period 8-17
Changing the Switch-to-Client Retransmission Time 8-17
Setting the Switch-to-Client Frame-Retransmission Number 8-18
Setting the Re-Authentication Number 8-18
Configuring the Host Mode 8-19
Resetting the IEEE 802.1x Configuration to the Default Values 8-20
Configuring IEEE 802.1x Accounting 8-20
Displaying IEEE 802.1x Statistics and Status 8-21
CHAPTER
9 Configuring Interfaces 9-1
Understanding Interface Types 9-1
UNI, NNI, and ENI Port Types 9-2
Port-Based VLANs 9-2
Switch Ports 9-3
Access Ports 9-4
Trunk Ports 9-4
Tunnel Ports 9-4
Routed Ports 9-5
Switch Virtual Interfaces 9-5
EtherChannel Port Groups 9-6
Dual-Purpose Ports 9-6
Connecting Interfaces 9-7
Using Interface Configuration Mode 9-8
Procedures for Configuring Interfaces 9-8
Configuring a Range of Interfaces 9-9
Configuring and Using Interface Range Macros 9-10