Filter
Top Products
9-4
Cisco WAN Modeling Tools Guide
OL-10426-01, Rev. A0
Chapter 9 Configuration Extraction Tool
Other CET Commands
Figure 9-1 CET Schematic Overview
Other CET Commands
There are several other CET commands that may help you more effectively use the software:
• svp_dmp. Use this command to if the CET generates a defective .cnf file. This command should be
run immediately after you run the svp2cet command. This command dumps the data from CWM
tables into a series of .dmp files. These files can be analyzed by your Cisco customer support
representative. Enter this command as in the following example:
svp_dmp
netw_name
nwt_name is the name of the network.
• svp_rev—Use this command to find out the CWM revision level.
• swt_rev—Use this command to find out the software revision level of your switches.
svp2cet
.con
ports
.svp
links
.svp
Informix
database
nodes
.svp
livenet
.cnf
domains
.svp
cet2nmt
.con
svp2cet
livenet
cet2nmt
livenet
nmt
(Read livenet)
Cisco
WAN
Working directory
Directory
livenet
Cisco Network
S6043