Filter
Top Products
4-15
Cisco WAN Modeling Tools Guide
OL-10426-01, Rev. A0
Chapter 4 Configuration Tables and Fields
Data Table
Port ID
2
0 E Logical slot/port number at the remote
site for the connection. (You can assign
or NMT will assign.)
ID2
Qty 1 M Quantity. Number of data connections.
CONNS *
Since slot and port are
included, this field is
always set to 1.
*
Type 56 E/H Data rate such as 19.2, or 19.2f for fast
EIA (for example, interleaved data and
event bytes).
TYPE *
Derived heuristically.
Modifier F not available
until Release 8.1; nx64,
nx56 shown as the
resulting product starting
with Release 9.1.
*
E2E_TY
PE
SPVC M The end to end type of the connection.
PVC, SPVC, XPVC, Hybred and 1Ended
are all valid.
E2E
Coded:
C - PVC
S- SPVC
H- Hybred
X - XPVC
E - Single ended
EIA 2/2 O Maximum signalling sampling rate, 0 to
20 times per second.
EIA1 /
EIA2
Cd 8 O Encoding format. 7 for 7/8 coded data
and 8 for 8/8 coded data. Connections of
1.344 Mbps or higher require 8/8.
CODE *
Defaults used until
Release 7.2.
PR 0 O Rerouting priority. 0 to 15, with 0 the
highest rerouting priority.
COS
Defaults used prior to
Release 8.5.
*
Ad – O/H Restriction type.
AV D
Red N P Redundancy. Specifies whether data
connections are going to be redundant.
Applies to CDP, SDP, and LDP Y-cable
redundancy.
RED
DFM N O Data Frame Multiplexing.
Y—connection requires DFM. When
connections have DFM, the site value is
ignored. N—connection does not use
DFM.
DFM *
Default used until
Release 7.2.
Table 4-7 Data Table (continued)
Field
Defaul
ts
Note
s Description and Comments DBF CET TPI