Filter
Top Products
4-27
Cisco WAN Modeling Tools Guide
OL-10426-01, Rev. A0
Chapter 4 Configuration Tables and Fields
Card Table
Card Table
The Card table is an optional table that specifies the cards that populate the chassis. Links and
connections may use these cards.
Table 4-14 Card Table
Field Defaults Notes Description and Comments DBF CET TPI
Node — M/H Site name of the chassis being specified.
SITE
*
Slot — M/H Slot that the remainder of the fields in this table
applies to.
SLOT
*
Status — M/H Status of the card. For manually entering data,
consider ACTIVE, REDUNDANT, STANDBY,
RESERVE. For CWM extracted data, the actual state
of the card will be listed.
STAT
*
Frontcard — M/H Front card residing at this site and slot. Note that
NMT will reserve the slot for cards the model does
not yet support. (VISM for example)
FTYPE
*
RedSlot — M/H Slot supporting redundancy. For active cards, defines
the slot of the standby or redundant card for 1:N
redundancy. For standby or redundant cards, it
specifies the active card.
RSLOT
*
Backcard — M/H Back card associated with the front card.
BTYPE
*
Backcard2 — M/H Secondary back card associated with the front card, if
applicable. Double height MGX cards can have
secondary back cards.
BTYPE2
*
FwRev — M/H Frmware revision of the front card. Extracted from
CWM, not used by NMT.
FFW
*
HwRev — M/H Hardware revision of the front card. Extracted from
CWM, not used by NMT.
FHW
*
FC_Serial — M/H Serial number of the front card. Extracted from
CWM, not used by NMT.
FSERIAL
*
BC_HwRe
v
— M/H Hardware revision of the back card. Extracted from
CWM, not used by NMT.
BHW
*
BC_Serial — M/H Serial number of the back card. Extracted from CWM,
not used by NMT.
BSERIAL
*
BC2_HwR
ev
— M/H The hardware revision of the secondary back card.
Extracted from CWM, not used by NMT.
BHW2
*
BC2_Serial — M/H The serial number of the secondary back card.
Extracted from CWM, not used by NMT.
BSERIAL2
*