Filter
Top Products
4-26
Cisco WAN Modeling Tools Guide
OL-10426-01, Rev. A0
Chapter4 Configuration Tables and Fields
Feeder Table
Feeder Table
The Feeder table contains topological information about feeder connections in the network.
IngMinBw 0 0 Minimum bandwidth in cps in the
ingress (receive) direction reserved
for this partition. Zero value means
no specification
ING_MIN_BW
IngMaxBw 0 0 Maximum bandwidth in cps in the
ingress (receive) direction reserved
for this partition. Zero value means
no specification.
ING_MAX_BW
AW 0 0 Administrative weight for PNNI.
Overrides the AW value specified in
the link table. A value of 0 is
ignored.
Note The field only applies to
PNNI.
AW
Table 4-12 Interface Table (Port Specific Parameters) (continued)
Field Defaults Notes Description and Comments DBF CET TPI
Table 4-13 Feeder Table
Field Defaults Notes Description and Comments DBF CET TPI
Site — M/H Site name.
SITE
*
Port_ID 0 E Slot/port ID used for linking the NMT’s
Bursty traffic table to the port table. Also
used for bundling.
HUB_ID
*
Name — O Feeder name. May be left blank.
NAME
MC3810 not
supported until
Release 9.1.
Type O/H Choice of 38-1, 38-3, 38-8 for 3810 1-,
3-, or 8-slot chassis respectively; FP-4 or
FP-8 for FastPAD 4-port or 8-slot units,
respectively; p11 or p44 for 1- or 4-shelf
port concentrators, or MGX 8220 for an
MGX 8220 edge concentrator.
Generic choices of 3810, FP, and PC are
provided. When these are chosen, NMT
will select the least cost unit.
TYPE
MC3810 not
supported until
Release 9.1.
Speed 64 O/H Clock speed of the port to which the
feeder is connected. MGX 8220 speeds
are fixed based on interface type. Speeds
for the other feeders can range from 19.2
to 2048 kbps depending on the feeder and
the interface.
SPEED
MC3810 not
supported until
Release 9.1.