Filter
Top Products
4-3
Cisco WAN Modeling Tools Guide
OL-10426-01, Rev. A0
Chapter 4 Configuration Tables and Fields
Sites Table
Site Type Switch M/H Function of platform at the site.
Can be a switch, feeder,
controller or a stand alone unit.
STYPE * Restrictions imposed
on links
SwRel O Software release of the
switch(es) at this site. If blank,
this field defaults to the global
value defined in the Model
Settings.
SW_REL *
PC Blank P Processor card. If Blank, use the
latest.
NPC *
From card table.
Default value used
until Release 9.1.
Red Y P Redundancy. Y—site has
redundant components. N—site
does not have redundant
components.
RED
Cab T1 P Cabinet. Specifies cabinet type
(T1—American or Far Eastern;
E1—European).
CABINET
Power A P/H Power supply. AC_DC
DFM N O Data Frame Multiplexing.
Y—site uses DFM. N—site does
not use DFM. If a data
connection terminating at this
site has a DFM setting of Y, it
takes precedence over the site
setting.
DFM
S/R P O Save/Restore. Y—site uses
save/restore configuration
software. N—site does not use
save/restore configuration
software.
S_R
FrFac 1.14 O Frame Relay Factor. Multiplier to
account for frame overhead on
the IPX Mux Bus. (The 1.14
default is an IPX legacy setting.)
FR_FAC
Bundle 24 O Maximum number of
connections that can be routed
simultaneously. Default is 32;
choose between 1 and 29.
BUNDLE
Modem% 0 E Percentage of modem traffic on
voice connections originating at
this site.
MODEM_P
CT
Table 4-1 .Site Table (continued)
Field Defaults Notes Description and Comments DBF CET TPI