MONITOR
qualifier can be used to reset all the averages currently being displayed. It is also
useful if monitoring is resumed after issuing one or more RTR commands.
/VERIFY
/NOVERIFY (D)
Specifies that the contents of
monitor-file-spec
are echoed on
stdout
. This is
useful when developing monitor files to find the exact location of syntax errors.
Related Commands
•
SCROLL
•
PRINT
•
CLEAR
•
DISPLAY NUMERIC
•
DISPLAY BAR
•
DISPLAY TEXT
Examples
RTR> MONITOR CALLS/NODE=(TR2,TR1)/INTERVAL=10
1
RTR> SHOW PROCESS
2
RTR> MONITOR/RESUME
3
1
Display the
CALLS
picture, monitoring nodes TR2 and TR1 every ten seconds.
2
The
SHOW PROCESS
command is entered, interrupting the display.
3
Redisplay the
CALLS
picture using the original parameters.
RTR> MONITOR TRAFFIC/COUNT=10/OUTPUT=PICTURE.LIS
This command stores 10 images of the
TRAFFIC
picture in the file
PICTURE.LIS
.
6–102 RTR Command Line Interface