Filter
Top Products
RECALL
RECALL
Display a previously entered command for subsequent command editing.
Format
RECALL [command-specifier]
Command Qualifiers Defaults
/ALL /NOALL
Description
When you enter commands to the RTR Utility, they are stored in a recall buffer
for later use with the
RECALL
command. Commands can be recalled by either
entering the first few characters of the command or the command’s number. The
RECALL/ALL
command can be used to list the last twenty commands.
When you recall a command, the RTR Utility displays the command but does not
execute it. If you want to execute the command as it appears, press RETURN.
You can also use the command editing facility to make changes in the command
line and then press RETURN to process the revised version of the command.
Parameters
command-specifier
Specifies
either
the command number
or
the first few characters of the command
you want to recall.
If
command-specifier
is omitted then the most recently entered command is
recalled.
Qualifiers
/ALL
/NOALL (D)
Displays all the commands (and their numbers) available for recall.
Examples
RTR> CREATE FACILITY QUOTES/FRONT=FE3/ROUTER=TR2
1
RTR> SHOW FACILITY/LINK
2
RTR> RECALL CREATE
3
RTR> CREATE FACILITY QUOTES/FRONT=FE3/ROUTER=TR2
4
RTR> CREATE FACILITY ORDERS/FRONT=FE3/ROUTER=TR2
5
1
Create facility "QUOTES"
2
Check the links
3
Recall the
CREATE FACILITY
command
4
Change the facility name to "ORDERS" and resubmit the command.
6–104 RTR Command Line Interface