Filter
Top Products
RTR Utility Error Messages
%RTR-E-NOSUCHITM, Nothing displayed at x = [A],y=[A]
Explanation: Indicates that invalid coordinates were specified on a "CLEAR
DISPLAY" or "SHOW DISPLAY" command. No item is displayed at point [A],
[B].
%RTR-E-NOSUCHNOD, No such node, [A]
Explanation: The requested node [A] does not exist.
%RTR-E-NOSUCHPRC, No such process, process ID = [A] (0x[A])
Explanation: The process with PID = [A] does not exist or is not using RTR.
%RTR-E-NOSUCHPRCS, No such process, process ID = [A]
Explanation: The process with PID = [A] does not exist or is not using RTR.
Like NOSUCHPRC, but used where the PID is only available as a string.
%RTR-E-NOSUCHPRT, No partition matched [A]
Explanation: The requested partition [A] does not exist.
%RTR-E-NOTCP, TCP specified for [A], but transport protocol unavailable or
disabled
Explanation: TCP was specified as required through use of a hostname
("tcp." or a substitute), but no hostname entry can be found. Add an entry for
the indicated node to your /etc/hosts file or to you name server.
%RTR-E-NOTHLIST, Nothing to LIST ...
Explanation: Nothing to list.
%RTR-E-NOTHTODIS, There is nothing to display
Explanation: Indicates that no items had been defined with the DISPLAY
command when a "MONITOR" or "SCROLL" command was issued.
%RTR-W-NOTNEG, Qualifier or keyword not negatable - remove "NO" or omit
n [A]
Explanation: The word "NO" preceded a qualifier or keyword, but the
qualifier or keyword cannot be specified as a negative.
%RTR-E-NOTNESTEDTX, TX in progress is not nested
Explanation: A call to rtr_prepare_tx was called on a channel with an active
TX that is not a nested TX. To start a nested TX, you must start the TX by
calling rtr_start_tx with a valid jointxid parameter.
%RTR-E-NOTSAMTYP, All counters must have same type, [A]
Explanation: Counter [A] is not the same type as the other counters in the
expression. All counters in an expression must be either ’process counters’,
’facility counters’, ’link counters’ or ’node counters’.
%RTR-I-NOTSTACOMSRV, Could not start command server on node [A][A]
Explanation: Indicates that a command server couldn’t be started on the
specified node [A].
%RTR-F-NOVALU, Value not allowed - remove value specification
Explanation: A value has been specified for a qualifier that does not take a
value. Remove the value specification.
D–18 RTR Utility Error Messages