Filter
Top Products
CALL RTR_OPEN_CHANNEL
/OFFSET_OF_KEY=offset
/OFFSET_OF_KEY=0 (D)
Specifies the offset of the key within the messages in bytes. The default is zero,
that is, the key is at the start of the messages.
Note that only one key segment definition is allowed.
/OUTPUT[=file-spec]
/OUTPUT=stdout (D)
Specifies that the resulting information is written to the file
file-spec
.If
/OUTPUT
or
file-spec
is omitted then the standard or default output is used.
/PARTITION_NAME=partition-name
Enables a system manager to specify a particular named partition.
/PREPARE_EXPLICIT
/NOPREPARE_EXPLICIT
Specifies that the flag RTR_F_OPE_EXPLICIT_PREPARE is set in the call to
rtr_open_channel( )
.
/RECIPIENT_NAME=rcpnam
/RECIPIENT_NAME=null (D)
Specifies an optional name for broadcast reception to be associated with the
channel. Only broadcasts matching this name are delivered on the channel.
(Note that to receive named events, the correct event number must also be
specified.)
RECIPIENT_NAME is case sensitive. If /RECIPIENT_NAME is supplied without
a qualifier value, then its value defaults to the value of /CHANNEL_NAME. Not
supplying the /RECIPIENT_NAME qualifier has the same effect as specifying a
null string. Wild card characters
cannot
be used for this qualifier. (Senders of
broadcasts can use wildcards when specifying /RECIPIENT_SPEC).
/SERVER
/NOSERVER (D)
Specifies that the RTR_F_OPE_SERVER flag is set in the call to
rtr_open_channel( )
. Use this qualifier if you want to declare the channel
as a server.
/SHADOW
/NOSHADOW (D)
The /SHADOW qualifier specifies that the RTR_F_OPE_SHADOW flag is set in
the call to
rtr_open_channel( )
. The server is part of a shadow pair.
/STANDBY (D)
/NOSTANDBY
The /NOSTANDBY qualifier specifies that the flag RTR_F_OPE_NOSTANDBY
is set in the call to
rtr_open_channel( )
, and the server may not be (or have)
standby(s). By default, servers may have standby(s).
/TR_CALL_OUT
/NOTR_CALL_OUT (D)
Specifies that the RTR_F_OPE_TR_CALL_OUT flag is set in the call to
rtr_open_channel( )
, and the server is a router call-out server. By default a
server is not a router call-out server.
6–20 RTR Command Line Interface