Filter
Top Products
RTR Utility Error Messages
%RTR-E-CLOSEPEND, Send failed due to close pending on channel - call rtr_
receive_message
Explanation: Sending of data to the ACP has been aborted due to
the presence of an undelivered mt_closed message on the channel. The
application may retrieve the reason for the channel closure, by calling the
receive_message verb to receive the mt_closed message.
%RTR-I-CMDIGNORE, Command ignored for defined facility role
Explanation: Indicates that the command is ignored on the executing node
since it has no significance for the role defined.
%RTR-I-CMDNOTWRK, [A]-command not implemented
Explanation: This command is not currently implemented.
%RTR-E-CMDRESDEV, Command reserved to RTR development
Explanation: An unsupported command was issued.
%RTR-E-CMDTOOLON, Command too long
Explanation: Command was longer than 256 characters.
%RTR-E-CNTCRJOU, Cannot create journal directory
Explanation: Cannot create journal directory.
%RTR-S-COMARESEN, Commands sent by default to node [A]
Explanation: Displays the default nodes for command execution after
issuing a "SET ENVIRONMENT" or "SHOW ENVIRONMENT" command.
%RTR-E-COMNOTFOU, Command not found [A], use RECALL/ALL
Explanation: Indicates that the command [A] requested with "RECALL"
was not in the recall buffer.
%RTR-E-COMNUMMUS, Command number must be between 1 and [A]
Explanation: Indicates that the command number requested with
"RECALL" was not in the allowed range (1 to [A]).
%RTR-F-CONFLICT, Illegal combination of command elements - check
documentation
n [A]
Explanation: Two or more keywords, qualifiers or parameters that cannot
be used in in combination have been in the same command line.
%RTR-I-DEQDATA, Received data ([A] bytes) [A]
Explanation: Displays the dequeued data [B] and its length in bytes [A].
%RTR-F-DFSDISK, Disk is served by DFS
Explanation: An attempt was made to create a journal on a disk served by
DFS. RTR does not support journals on DFS supported disks.
%RTR-I-DISABMOD, [A] mode disabled
Explanation: Displays the name [A] of the mode that was disabled after
issuing a "SET MODE" command.
RTR Utility Error Messages D–3