Filter
Top Products
SET PARTITION
SET PARTITION
Sets various partition related options.
Format
SET PARTITION partition-name
Command Qualifiers Defaults
/FACILITY=[facility_name]
/FAILOVER_POLICY=[SHADOW|STAND_BY]/
/IGNORE_RECOVERY /NOIGNORE_RECOVERY
/PRIORITY_LIST=backend-node-list /
/RECOVERY_RETRY_COUNT=n /
/RESTART_RECOVERY /
/RESUME /
/SHADOW /NOSHADOW
/SUSPEND /
/TIMEOUT=nn /
Description
The
SET PARTITION
command sets the characteristics of a named partition. Only
backend partitions may be manipulated with this command; the command must
be entered on the backend where the partition is located.
Use SET PARTITION any time after the partition has been created (either
explicitly by CREATE PARTITION or implicitly by starting a server.) Note
that the command only takes effect after the first server joins a partition. Any
errors encountered at that time will appear as RTR log file entries. Using SET
PARTITION to change the state of the system results in a log file entry.
Parameters
partition-name
The name of the partition being manipulated. This may be specified
as
partition_name
(if the partition name is unique on the node), or as
facility_name:partition_name
.
Qualifiers
/FACILITY=
facility_name
(D)
Determines the facility that the partition command will act on. This is required.
/FAILOVER_POLICY=SHADOW
/FAILOVER_POLICY=STAND_BY (D)
Determines the action to take when the primary partition fails. The default
action is to allow a standby of the primary to become the new primary. Optionally,
RTR can be set to change state so that the secondary becomes primary, and a
standby of the old primary (if any) becomes the new secondary.
6–122 RTR Command Line Interface