Filter
Top Products
SHOW SERVER
Table 6–23 Server Flags
FLAG Meaning
BEC Backend Call-out
EXA Explicit Accept
EXP Explicit Prepare
NCC No Concurrent
NSB No Standby
SHD Shadow
SRV Server
TRC Router Call-out
Qualifiers
/CLUSTER
/NOCLUSTER (D)
Specifies that the command is executed on all the nodes in the cluster.
If neither
/NODE
nor
/CLUSTER
is specified then the command is executed on the
nodes specified by the latest
SET ENVIRONMENT
command. If no
SET ENVIRONMENT
command has been entered then the command is executed only on the node where
the command was issued.
Note: In environments that do not support clustering, use of the /CLUSTER
qualifier will cause the relevant command to be executed on the local node only.
/IDENTIFICATION=process-id
/NOIDENTIFICATION (D)
Specifies the PID of the process for which information should be displayed. The
default (/NOIDENTIFICATION) displays information for all servers.
/FACILITY
/FACILITY="*" (D)
Specifies the facility name for which information should be displayed.
By default, information is displayed for all Facilities.
/FULL
/NOFULL (D)
Specifies a detailed listing of server information.
/NODE[=node-list]
/NODE=default-node-list (D)
Specifies that the command is executed on all nodes specified in
node-list
.If
node-list
is omitted then the command is executed only on the node where the
command was issued.
/OUTPUT[=file-spec]
/OUTPUT=stdout (D)
Specifies that the resulting information is written to the file
file-spec
.If
/OUTPUT
or
file-spec
is omitted then the standard or default output is used.
6–166 RTR Command Line Interface