Filter
Top Products
CALL RTR_PREPARE_TX
CALL RTR_PREPARE_TX
The CALL RTR_PREPARE_TX command causes a command server to execute
the
rtr_prepare_tx( )
routine and to display the returned status.
Format
CALL RTR_PREPARE_TX
Command Qualifiers Defaults
/CHANNEL_NAME=channel-name /CHANNEL_NAME=RTR$DEFAULT_CHANNEL
/DATA[=data] /DATA=0
/NODE[=node-list] /NODE=default-node-list
/OUTPUT[=file-spec] /OUTPUT=stdout
/REASON[=reason] /REASON=0
Description
The CALL RTR_PREPARE_TX command causes a command server to call the
rtr_prepare_tx( )
routine using values supplied on the command line.
The numeric status returned from the call is then converted to its textual
representation and displayed.
The
rtr_prepare_tx( )
routine itself is described in Application Programmer’s
Reference Manual.
The prototype of
rtr_prepare_tx( )
is:
rtr_status_t rtr_prepare_tx (
rtr_channel_t channel,
rtr_pre_flag_t flags,
rtr_reason_t reason
rtr_msgbuf_t pmsg
rtr_msglen_t msglen
);
Table 6–8 shows the correspondence between values you supply on the command
line and the C language parameter values produced and used for the call.
Table 6–8 Parameters for rtr_prepare_tx
C Parameter name C Parameter Value Command Line Specification
channel /CHANNEL_NAME=name
flags RTR_NO_FLAGS [none] [D]
reason RTR_NO_REASON /NOREASON [D]
reason_value /REASON=reason_value
pmsg, msglen / DATA=data
The CALL RTR_PREPARE_TX command causes a command server to execute
the rtr_prepare_tx( ) routine using the values supplied on the command line.
The numeric status returned from the call is then converted to its textual
representation and displayed.
6–22 RTR Command Line Interface