Filter
Top Products
RTR Utility Error Messages
%RTR-E-ITMALREXI, There is already something displayed at x = [A], y = [A]
Explanation: Indicates that invalid coordinates were specified on a
"DISPLAY" command within a display file. There already is an item at point
[A], [B].
%RTR-F-IVKEYW, Unrecognized keyword - check validity and spelling
n [A]
Explanation: A keyword specified in a command is not valid for the
command. The rejected portion of the command is displayed between
backslashes.
%RTR-F-IVQUAL, Unrecognized qualifier - check validity, spelling, and
placement
n [A]
Explanation: An invalid qualifier is specified.
%RTR-F-IVVERB, Unrecognized command verb - check validity and spelling
n [A]
Explanation: The first word in the command is not a valid CLI command
or a name equated with a command. The rejected portion of the command is
displayed between backslashes.
%RTR-W-JOUALREXI, Journal already created
Explanation: A previously existing journal was found.
This status may be returned by the CREATE JOURNAL command.
1) You have issued an RTR CREATE JOURNAL command without deleting
the previous journal.
Corrective action:
a) Use the /SUPERSEDE qualifier with CREATE JOURNAL or b) Delete the
old journal with the DELETE JOURNAL command.
%RTR-F-JOUFILMIS, RTR journal file missing - Find missing file or CREATE
JOURNAL /SUPERSEDE
Explanation: One of previously initialized RTR journal files for a backend
could not be found. This status may be returned by the CREATE FACILITY
and SHOW JOURNAL commands.
Probable causes are:
(1) One of the disks being used for journalling is unavailable, or
(2) A user has inadvertently deleted an RTR journal file.
Corrective action, either:
(a) Bring the missing disk back on line, or
(b) Reissue the RTR CREATE JOURNAL /SUPERSEDE command to create a
new journal (in this case any recovery information in the old journal is lost).
RTR Utility Error Messages D–11