Filter
Top Products
CALL RTR_BROADCAST_EVENT
CALL RTR_BROADCAST_EVENT
The CALL RTR_BROADCAST_EVENT command causes a command server to
execute the
rtr_broadcast_event( )
routine and to display the returned status.
Format
CALL RTR_BROADCAST_EVENT [message-field1] [,message-field2...]
Parameters
[message-field1] [,message-field2...]
Specify the message to be sent (if any) as one or more comma separated
parameter values. You can use the /TYPE_OF_DATA and /LENGTH_OF_DATA
positional qualifiers on each parameter value to specify the data type and length
of each field.
Command Qualifiers Defaults
/CHANNEL_NAME=channel-name /CHANNEL_NAME=RTR$DEFAULT_CHANNEL
/CLUSTER /NOCLUSTER
/EVENT_NUMBER=evtnum none
/FORMAT=fmt-string /NOFORMAT
/LENGTH_OF_FIELD=message lengthDepends on data type; see description.
/NODE[=node-list] /NODE=default-node-list
/OUTPUT[=file-spec] /OUTPUT=stdout
/RECIPIENT_SPEC=rcpspc /NORECIPIENT_SPEC
/TYPE_OF_DATA=data type /TYPE_OF_DATA=STRING
Description
The CALL RTR_BROADCAST_EVENT command causes a command server to
call the
rtr_broadcast_event( )
routine using values supplied on the command
line.
The numeric status returned from the call is then converted to its textual
representation and displayed.
The
rtr_broadcast_event( )
routine itself is described in Application
Programmer’s Reference Manual.
The prototype of
rtr_broadcast_event( )
is:
rtr_status_t rtr_broadcast_event (
rtr_channel_t channel,
rtr_bro_flag_t flags,
rtr_msgbuf_t pmsg,
rtr_msglen_t msglen,
rtr_evtnum_t evtnum,
rtr_rcpspc_t rcpspc,
rtr_msgfmt_t msgfmt
);
Table 6–2 shows the correspondence between values you supply on the command
line and the C language parameter values produced and used for the call.
6–6 RTR Command Line Interface