Filter
Top Products
CALL RTR_CLOSE_CHANNEL
CALL RTR_CLOSE_CHANNEL
The CALL RTR_CLOSE_CHANNEL command causes a command server to
execute the
rtr_close_channel( )
routine and to display the returned status.
Format
CALL RTR_CLOSE_CHANNEL
Command Qualifiers Defaults
/CHANNEL_NAME=channel-name /CHANNEL_NAME=RTR$DEFAULT_CHANNEL
/CLUSTER /NOCLUSTER
/IMMEDIATE /IMMEDIATE=RTR$DEFAULT_CHANNEL
/NODE[=node-list] /NODE=default-node-list
/OUTPUT[=file-spec] /OUTPUT=stdout
Description
The CALL RTR_CLOSE_CHANNEL command causes a command server to call
the
rtr_close_channel( )
routine using values supplied on the command line.
The numeric status returned from the call is then converted to its textual
representation and displayed.
The
rtr_close_channel( )
routine itself is described in Application
Programmer’s Reference Manual.
The prototype of
rtr_close_channel( )
is:
rtr_status_t rtr_close_channel (
rtr_channel_t channel,
rtr_clo_flag_t flags
);
Table 6–4 shows the correspondence between values you supply on the command
line and the C language parameter values produced and used for the call.
Table 6–4 Parameters for rtr_close_channel
C Parameter Name C Parameter Value Command Line Specification
channel /CHANNEL_NAME=name
flags RTR_NO_FLAGS [none] [D]
Qualifiers
/CHANNEL_NAME=channel_name
/CHANNEL_NAME=RTR$DEFAULT_CHANNEL
Specifies the channel for which the operation is to be performed.
The command server uses a combination of the channel_name and the window
from which the call was issued to uniquely identify which channel to use.
channel_name
is not case sensitive.
The default channel name is RTR$DEFAULT_CHANNEL.
You may close all the channels belonging to a window using
CLOSE CHANNEL/CHANNEL_NAME=*.
6–10 RTR Command Line Interface