Filter
Top Products
E-4
User’s Guide for ImageCard® Select™ and UltraGrafix® Select™ Printers
There is not enough disk space to complete this installation. Canceling
installation.
You are installing an older printer driver and a current version is
installed. Canceling installation.
You have selected a port that does not exist on the PC. Canceling instal-
lation.
Do you want to remove the existing printer driver or to install another
printer on a different port?
Possible Cause Action
During the installation process, disk
space was used by another
application, resulting in less than the
required amount of disk space.
Perform PC maintenance. See the e-
Guide for steps to follow.
Possible Cause Action
You are attempting to install an older
version 3.x printer driver and a more
recent version 3.x printer driver is
installedonthePC.
Use the most current printer driver
available for the printer. For available
drivers, see the Datacard Web site at
www.datacard.com.
Possible Cause Action
You have selected a port, such as
LPT3, and the port does not exist on
the PC.
Restart the PC and run the installation
again. Select a port that exists on the
PC when running the installation
again.
If the port exists on the PC, see
information about the port to
troubleshoot its operation.
Possible Cause Action
You have started the installation
program (InstallShield) and at least
one Datacard printer driver (version
3.0 or higher) is installed.
Select “Install” if the PC has an
available parallel port and you plan to
install another Datacard printer.
You have selected the printer driver
from the Add/Remove Programs
dialog box.
Select “Remove existing” to delete the
printer driver.