Filter
Top Products
7-2
Install the printer
User’s Guide for ImageCard® Select™ and UltraGrafix® Select™ Printers
Unpacking the printer
Select a site that meets the requirements described in See “Before you install” on
page 6-1. Unpack the printer, following these steps.
You need scissors or another cutting device to unpack the printer.
Make sure you have one or more people to assist with unpacking the printer.
Unpack the printer
1 Place the shipping carton on a firm level surface.
2 Use a scissors to open the taped area on top of the shipping carton.
3 Open the shipping carton (step 1 in Figure 7-1).
Figure 7-1: Unpack the printer
4 Remove the accessories bag (step 2 in Figure 7-1).
The printer weighs 21 to 26.5 (9.7. to 11.9 kg). Use proper lifting techniques. Make
sure you have enough people to lift the printer comfortably.
5 Remove the Quick Install Chart from the carton (step 3 in Figure 7-1). The options
included with the printer are checked on the chart.
6 Lift the printer from the carton (step 4 in Figure 7-1) and place it on a counter or
other solid surface.
i
1
1
1
2
4
3
!