Filter
Top Products
Using the printer 2-3
User’s Guide for ImageCard® Select™ and UltraGrafix® Select™ Printers
For magnetic stripe cards, the magnetic stripe faces down and is positioned
toward the side of the printer that opens (see Figure 2-3). (For some custom
applications, you might receive instructions to place cards in a different
orientation.)
For smart cards, position the card so the chip is up and toward open end of the
card cartridge.
Figure 2-3: Load cards into the card cartridge
4 Replace the card cartridge in the cavity (step 1 in Figure 2-4). Push the bottom of
the card cartridge toward the printer until it clicks into place (step 2 in Figure 2-4).
Figure 2-4: Replace the card cartridge
If the printer has a locking card cartridge, lock the cartridge after replacing it.
♦
Magnetic Stripe
Smart Card Chip
iSEL007u
1
2
i