Filter
Top Products
4-12 Maintaining the printer
User’s Guide for ImageCard® Select™ and UltraGrafix® Select™
6 Remove the printhead cables.
– Push the black locking tabs to the side. Remove the gray connector of the
printhead data cable from the printhead cartridge (see Figure 4-11).
– Pull firmly on the white connector of the printhead power cable to remove it
from the printhead cartridge. You can gently pull on the wires attached to the
plug if needed to remove the cable.
Figure 4-11: Printhead power and data cables and connectors
7 Remove the ground cable connector from the ground tab of the swing arm by
pulling on the red sleeve (see Figure 4-12).
Figure 4-12: Printhead ground cable
♦
Power cable
Data cable
Ground cable