Dell 2355dn All in One Printer User Manual


 
137
Clone Copying
This special copy mode can be applied when you load a document using only the document
glass. If a document is detected on the DADF, the
Clone
copying feature does not work.
NOTE: You cannot adjust the copy size using the Zoom menu while making a clone copy.
To make the
Clone
copying:
1
Place a single document face down on the document glass.
For details about loading a document, see "
Loading an Original Document".
2
Press
Copy
from the home screen.
3
Press the left/right arrows to select
Clone Copy
.
4
If necessary, customize the copy settings including number of copies, contrast, original
type, and original size by pressing
Options
. See "Setting Copy Options".
5
Press to go to the upper menu.
6
Press
Start
(
)
. (on the touch screen or the operator panel)
NOTE: You can cancel the copy job at any time. Press , and the copying will stop.
Poster Copying
This special copy mode can be applied when you load a document using only the document
glass. If a document is detected in the DADF, the Poster copying feature does not work.
NOTE: You cannot adjust the copy size using the Zoom menu button for making a poster.
To make the
Poster
copying:
1
Place a single document face down on the document glass.
For details about loading a document, see "
Loading an Original Document".
2
Press
Copy
from the home screen.
3
Press the left/right arrows to select
Poster Copy
.
4
If necessary, customize the copy settings including number of copies, contrast, original
type, and original size by pressing
Options
. See "Setting Copy Options".
5
Press to go to the upper menu.
6
Press
Start
(
)
. (on the touch screen or the operator panel)
NOTE: You can cancel the copy job at any time. Press , and the copying will stop.
Your original document is divided into 9 portions. Each portion is scanned and printed
one by one in the following order: