Filter
Top Products
280
Check
Cartridge Area
Paper has jammed in the fuser area. Clear the jam.
See "
Fuser Area Jam".
Fuser Door Open The fuser door is not securely latched. Open the rear door and close the fuser door
until it locks into place. For the location of
the fuser door, see "
Paper Exit Jam".
Rear Cover is open The rear door was opened. Close the rear door.
Scanner lock is engaged,
unlock it
The scanner module is locked. Unlock the scanner.
Scan Job is completed
with error :
File Existed
The same named file is already exist. Enter a different file name.
Scan Job is completed
with error :
Filename is too long
All file names are used already. Delete unnecessary files.
Scan Job is completed
with error :
File Access Denied
Login to the network server was successful.
However, access to the file on the network
server was denied.
Change the server settings.
Self
Diagnostic...
Please wait
The engine in your printer is checking some
problems.
Please wait a few minutes.
SMPS Error A problem has occurred in the SMPS unit. Unplug the power cord and plug it back. If
the problem persists, please call for service.
Standard Bin Full The document output tray is full. The document output tray can hold up to
150 sheets of plain paper. Once the paper is
removed from the document output tray, the
printer resumes printing.
Toner Cartridge is not
installed
The toner cartridge is not installed. Install the toner cartridge. See "
Installing the
Toner Cartridge".
Toner Supply Error Toner did not supply enough. The front cover is not securely latched.
Close the cover until it locks into place.
Toner Cartridge Error Toner cartridge error. The front cover is not securely latched.
Close the cover until it locks into place.
Display message Meaning Suggested solutions